You are here:  Krono.com | Kronotex | Floor technology
Euronorm.jpg Standards
These European standards set forth properties, standards and testing procedures for laminate flooring. The standards encompass a classification system that is based on EN 685.
Transport.jpg Transport and Storage
Please transport Kronotex flooring carefully and in their original packaging. Use open cartons before starting a new one. Large quantities should be stored in their original cartons in order to protect the product from...
Verlegevideo.jpg Video for Laying
Video for laying in the Macromedia Flash Format (224 kb) If you should get an empty Frame you have to consider watching the video you need the Macromedia Flash Player 6...
Vorbereitung.jpg Preparation for installation
Prior to laying, please store Kronotex flooring horizontally in its unopened packaging at room temperature for a minimum of 48 hours (minimum 18° C) so that the planks have enough...
Verlegecheckliste.jpg Installation checklist
In order to ensure that you will enjoy years of pleasurable use from your floor, please go through this brief checklist prior to laying. 1. Examine, wether between floor and door is enough space...
Grundregeln.jpg Basic parameters of Kronotex Laminate floors
1. The installation should be performed at an ambient temperature of at least 18° C, a ground temperature of at least 15° C and relative humidity of 50% (minimum) and 75% (maximum). Please do not aerate the ...
Verlegen.jpg Installation made easy
With the “Clic2Clic“ technique even you can install Kronotex laminate floors yourself. This saves considerable expense and after a brief orientation can even be fun. Kronotex has already prepared ...
Besondere-Stellen.jpg Special areas
1. If the space contains vertical surfaces such as heating pipes or room dividers, cut the planks to the correct length first. Then lay the pieces next to the places where they are to be installed, measure ...
vollverklebung.jpg Full-surface gluing
1. Kronotex flooring can of course be installed with full-surface gluing. However, slab surface properties must be determined with extreme precision beforehand, and it must also be decided ...
Ktex1 Subsequent treatment
24 hours after installing a Kronotex floor, you can walk on it and move all the furniture back in. Remove spacers and cover any expansion spaces. Your Kronotex dealer can supply ...

12 >>   ...2
Back Print version specify as starting side
Basic
LIFE CAN BE SO COOL
Smart
LIFE CAN BE SO MUCH FUN
Dynamic
LIFE CAN BE SO VARIED
Exquisit
LIFE CAN BE SO CHIC
Robusto
Life can be so solid
Amazone
LIFE CAN BE SO STYLISH
Mega
LIFE CAN BE SO MAGICAL
Mammut
LIFE CAN BE SO TOUGH
Principle Q
Your Guarantee