With the “Clic2Clic“ technique even you can install Kronotex laminate floors yourself. This saves considerable expense and after a brief orientation can even be fun. Kronotex has already prepared everything you will need. But to “Click” successfully a few simple rules must be followed.
Preparation
Before installation, Kronotex flooring should be stored horizontally in the room for at least 48 hours, unopened in its original packaging. Before, during and at least three days after installation, the room should be maintained in the following conditions:
Floor surface: min. 15°C Air temperature: min. 18°C Humidity: 50 - 75%
1. Lay insulation
2. Place panels close together
3.Rotate a half panel into place
4. Connect panels longitudinally
5. Connect end joints - Continue, forming staggered rows
6. Rotate remaining piece 180 degrees and mark as logical.Cut last panel, rotate 180 degrees and insert
7. Insert panel using a pull bar. Start next row (min 40 cm) using remaining piece
;)
;)
;)
;)
;)
;)
 using remaining piece','','');)
;)
;)
;)
;)
