Kronoply OSB - Anti Slip

	Home
	Contact / Imprint
	Sitemap

You are here: Krono.com | Kronoply | Kronoply OSB

Anti Slip

This panel is an OSB/3 baseboard with a phenolic coating on both sides (Top 440 g/m² - Bottom 220 g/m²). The Kronoply AntiSlip Industrial Panel has a PU-edge seal to minimise edge swelling.

It can be used as a floor plate in motor vehicle construction, as well as as an industrial floor (tent flooring, hall flooring, freight container and shelving). The Kronoply AntiSlip Industrial Panel is available in two different surface structures, on the one hand as a mesh structure (wire mesh) and with a diamond structure as an alternative which fixes the load by means of its high friction resistance. Therefore the goods or products at an angle are well secured and reliably prevented from sliding. The Kronoply AntiSlip large format panel (6000 x 2500 mm) offers the best properties as a panel for cutting to size.

PANEL CONSTRUCTION:

1. dark brown film coating in square sieve/rhomb structure 440 g/m²

2. Kronoply OSB/3 base panel

3. Edge sealing with waterproof PU edge sealing

Technical Data AntiSlip Industrial Panel

Product name Length(mm) Width
(mm) Panel thickness(mm) Packaging unit (no. of panels)
KRONOPLY AntiSlip-vehicle construction 2500 1250 12/15/18 -
2500 1250 22/25 -

Product properties KRONOPLY AntiSlip-vehicle construction

Surface One-sided coating with strainer or rhombus film (220 g/m² on each side) Backside smooth film coating

Edges smoothe edge, water resistent PU edge sealant

Bulk density 650 kg/m³ (+/- 20kg) in accordance with EN 323

Moisture content 9 % (+/- 3 %) in accordance with EN 322

Flexional resistance Parallel to the direction of tension of the top coat 26 N/mm²
at right angle to the direction of the tension of the top coat 15 N/mm² in accordance with EN 789

Elasticity module flexion at right angle to the panel
Parallel to the direction of tension of the top coat 7000 N/mm²
at right angle to the direction of tension of the top coat 4000 N/mm² EN 789

Emission class E1 in accordance with EN 120

Resistance to screw - extraction (maximum screw extraction resistance)
≥ 1300 N
≥ 1200 N
in accordance with EN 320

Slip resistant

Area of application

Derived timber product class 20
Slip resistance R10
Displacement space V

Panel with high slip resistance
vehicle construction, hall flooring, freight containers and tent flooring

The above figures are not binding and intended as a guideline only. They are dependent on the conditions of use and treatment applied by the user.