This shuttering panel has a phenolic coating on both sides of 220 g/m². This coating guarantees that apart from an application of mould release agent, the panel requires no further processing. Kronoply FF-Special behaves anisotropically as a conventional chipboard panel, as a consequence of this the direction of span must be watched when laying the panels.
All wood materials have a tendency to swell, this also applies to Kronoply FF-Special, which absorbs water much more slowly contrary to chipboard and bar plywood due to its phenolic coating and high quality edge sealing. Kronoply FF-Special minimises annoying edge swellings (thickness swell of the edges), which led to time-consuming reworking.
Technical Data FF-Special
| Product name |
Length(mm) |
Width
(mm) |
Panel thickness(mm) |
Packaging unit (no. of panels) |
|
| KRONOPLY FF-Special universal shuttering panel |
6000
|
2500 |
21/27 |
15/10 |
|
|
5600 |
2070 |
21/27 |
15/10 |
|
2500 |
1250 |
21/27 |
45/40 |
|
2500 |
625 |
21 |
45 |
| Product properties |
Kronoply FF-Special |
|
| Surface |
Film-coated (220 g/m² on each side) |
|
| Edges |
Chamfered edge longitudinally (half a V groove) |
|
| Bulk density |
650 kg/m³ (+/- 20kg) in accordance with EN 323 |
|
| Moisture content |
9 % (+/- 3 %) in accordance with EN 322 |
|
| Flexional resistance |
Parallel to the direction of tension of the top coat 26 N/mm²
at right angle to the direction of tension of the top coat 15 N/mm² in accordance with EN 789 |
|
| Elasticity module flexion at right angle to the panel |
Parallel to the direction of tension of the top coat >7000 N/mm²
at right angle to the direction of tension of the top coat >4000 N/mm² in accordance with EN 789 |
|
| Emission class |
E1 in accordance with EN 120 |
|
| Resistance to screw - extraction (maximum screw extraction resistance) |
≥ 1500 N
≥ 1000 N
in accordance with EN 320 |
|
|
Area of application |
KRONOPLY FF-Special is a universal shuttering panel and also suitable for bridge formwork with smooth concrete. |
Additional demensions available on request!
The above figures are not binding and intended as a guideline only. They are dependent on the conditions of use and treatment applied by the user.
| 
;)
;)
;)
;)
;)
;)
